FS4 ist ein 4-Kanal-2K / HD / SD- oder 1-Kanal-4K / UltraHD-Frame-Synchronizer und Up, Down, Cross-Converter. AJAs Flaggschiff-Frame-Synchronizer und Konverter bietet unglaubliche Vielseitigkeit und Konnektivität in einem schlanken 1RU-Frame für all Ihre 4K / UltraHD- und 2K / HD / SD-Konvertierungsbedürfnisse. FS4 bietet eine große Auswahl an Anschlussmöglichkeiten für Video und Audio und kann vier separate Geräte in 2K / HD / SD verarbeiten oder alle Prozessoren und Kanäle für maximale Flexibilität für 4K / UltraHD-Produktivität kombinieren.
Technische Daten
Modes of Operation
- Four Independent 2K, HD, or SD Video Processors
- One 4K, UltraHD, 2K, HD, or SD Video Processor
Video Formats
- (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 30
- (HD) 1920 x 1080i 50, 59.94, 60
- (HD) 1280 x 720p 50, 59.94, 60
- (SD) 525i 59.94
- (SD) 625i 50
- YCbCr, 4:2:2, 10-bi
Video Input Digital
- 4 x 3G-SDI inputs, 4 x BNC4 x 3G-SDI inputs, 4 x Fiber or HD-BNC (optional SFP modules)
- - SFP fiber modules, 3G-SDI, dual LC, single LC, or single SC, SMPTE-297
- - SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
- - SFP coax module, 12G/6G-SDI, dual HD-BNC
- 12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
- - Single Link 12G/6G-SDI (with optional SFP module)
- - Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
- - Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
- - Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
- - Quad Link HD-SDI (4 x 1.5G)
- - Dual Link HD-SDI (2 x 1.5G), SMPTE-372
- - Single Link HD/SD
- Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD input pixel mapping
- 8 x 1 selector feeds video processor(s)
Video Output Digital
- 4 X 3G-SDI outputs, 4 x BNC
- 4 x 3G-SDI outputs, 4 x fiber or HD-BNC (optional SFP modules)
- - SFP fiber modules, 3G-SDI, Dual LC, Dual LC CWDM, Single LC, or Single SC, SMPTE-297
- - SFP fiber module, 12G/6G-SDI, dual LC, SMPTE-297
- - SFP coax module, 12G/6G-SDI, dual HD-BNC
- 12G/6G/3G/HD/SD, SMPTE-259/292/424/2081/2082
- - Single Link 12G/6G-SDI (with optional SFP module)
- - Quad Link 3G-SDI Level A or B-DL (4 x 3G), SMPTE-425-5
- - Dual Link 3G-SDI Level B-DS (2 x 3G), SMPTE-425-3
- - Single Link 3G-SDI Level A, B-DL, or B-DS, SMPTE 425
- - Quad Link HD-SDI (4 x 1.5G)
- - Dual Link HD-SDI (2 x 1.5G), SMPTE-372
- - Single Link HD/SD
- Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD output pixel mapping
Monitor Output Digital
- 1 x BNC, 1 x 3G-SDI output
- - 3G-SDI/HD/SD, SMPTE-259/292/424, 10-bits
- 1 x HDMI, 1 x HD output
- - 2K/HD/SD, HDMI v1.4a
- Monitored Video Processor output (video and audio) is simultaneously output on both connectors
- 4K/UltraHD down-converted to 2K/HD
- Crop control on HDMI output
Video Processing
- Motion adaptive deinterlacer
- Proc amp controls
- Color correctorLegalizer
- Framerate conversion/film cadence removal/insertion (3:2, 1:2, 2:1, 2:3)
- Adjustable delay 0-6 frames with H and V timing controls
- Closed Caption conversion (CEA-608/CEA-708)
- AFD input detection, down-convert control, and output pass through or overwrite
- Freeze (manual or on input signal loss) to black or last good frame
- Matte generator for background fill
- Video test generator
- Nominal video delay
- - 4K/UltraHD, 3 frames (LFR), 6 frames (HFR)
- - HD/SD, 2 frames (LFR), 4 frames (HFR)
Format Conversion
- Convert any supported input format to any supported output format, within the same frame rate family. These three families are:
- - 59.94, 29.97, 23.98
- - 50, 25
- - 60, 30, 24
Scaling
- Supported in 2K/HD/SD formats
- Zoom in and out
- Reposition
- Region of Interest (ROI)
Up-Conversion
- Hardware 10-bit
- Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
- Zoom Letterbox: results in image zoomed to fill fullscreen
- Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting will introduce a small aspect ratio change
Down-Conversion
- Hardware 10-bit
- Anamorphic: fullscreen
- Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
- Crop: image is cropped to fit video output format
Aspect Ratio Conversion for SD to SD
- Letterbox: Transforms SD anamorphic material to a letterboxed image
- H Crop: Produces a horizontally stretched effect on the image; transforms anamorphic SD to full frame
- SD Pillarbox: Produces an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
- V Crop: Transforms SD letterbox material to an anamorphic image
Audio Input Digital
- 48 kHz sample rate
- 8 x SDI embedded inputs (16-Channels each)
- - 128-Channels, 24-bit (20-bit SD), SMPTE-272/299
- 8 x balanced AES inputs (16-Channels), 1 x DB-25
- - 16-Channels, 24-bit, AES-3
- 2 x MADI inputs, 1 BNC, 1 x ST Fiber
- - 128-Channels, 24-bit, AES-10
Audio Output Digital
- 48 kHz sample rate
- 1 x SDI embedded output per Video Processor (16-Channels each)
- - 16-Channels (in single Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
- - 64-Channels (in four Video Processor mode), 24-bit (20-bit SD), SMPTE-272/299
- 8 x balanced AES outputs (16-Channels), 1 x DB-25
- - 16-Channels, 24-bit, AES-3
- 2 x MADI outputs, 1 BNC, 1 x ST Fiber
- - 128-Channels, 24-bit, AES-10
Audio Processing
- 277 x 208 mono audio matrix, route 1 to 1, 1 to many
- - Inputs: 128 embedded, 16 AES, 128 MADI, 2 stereo mixdowns, 3 tone generator
- - Outputs: 64 embedded, 16 AES, 128 MADI
- Input adjustment controls for each channel
- - Gain +18 to -18 dB in 0.5 dB steps
- - Phase invert
- Input adjustment controls for each channel pair
- - Delay -16ms to +1sec in 20.8 us steps
- Two independent 5.1 or 7.1 to stereo mixdown processors with gain adjust
- High quality Sample Rate Conversion on all audio inputs
- SRC bypass for non-PCM audio (e.g. Dolby E, AC-3, etc)
- Audio tone generator (mute, 400 Hz, 1 kHz)
Reference Input
- External, 2 x BNC
- - Looping, nonterminating
- - Blackburst or tri-level sync
Genlock
- Lock to External Reference
- Lock to SDI input 1 thru 8
- Free run based on Temperature Compensated Crystal Oscillator
Network Interface
- 1 x RJ-45, 10/100/1000 Ethernet
- Embedded web server for remote control
- SNMP
Front Panel
- Display
- Keypad with status LEDs
- Two rotary/push knobs
- Comprehensive alarm indicators
Presets
- Each mode supports 40 Presets
GPI
- 1 x 25-pin D-Connector
- - Four optically isolated GPI inputs
- - Four optically isolated GPO outputs
