SD/HD Audio/Video Frame Sync/Konverter - das Schweizer Taschenmesser für das Rack in Studio und Ü-Wagen.
Features
- SD/HD up/down Konvertierung
- SD/SD Aspect Ratio Konvertierung
- HD/HD Cross Konvertierung (720p/1080i)
- 2 SDI, Composite, S-Video, Component HD/SD Ein- und Ausgänge
- 8 Kanäle AES, XLR analog und embedded SDI Audio Ein- und Ausgänge
- Voll Steuerbar über Netzwerk / Web Interface
- Video/Audio Test Signal Generator, Video Proc Amp, TBC, 2 Netzteile
Technische Daten
Video Formats
- 525i 29.97
- 625i 25
- 720P 50, 59.94, 60
- 1080i 25, 29.97, 30
- 1080PsF 23.98, 24
- 1080p 24, 25, 30
- Notes:
- 1. In the case of 1080pSF/23.98 input - and when 1080i59.94 (or 525) is selected as an output format, the FS1 automatically does 3:2 pulldown to get the correct frame rate.
- 2. When passing 24 or 60 framerate video, output is high definition.
Video Input Digital
- Dual SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits
- - Single Link 4:2:2 (1 x BNC each)
Video Input Analog
- HD component YPbPr, SMPTE-274 (3 x BNC)
- - 12-bit A/D, 2x oversampling
- SD Component (3 x BNC)
- - SMPTE/EBU N10, Betacam 525 line, Betacam 525J
- - 12-bit A/D, 4x oversampling
- - +/- .25 dB to 5.5 MHz Y Frequency Response
- - +/- .25 dB to 2.5 MHz C Frequency Response
- - .5% 2T pulse response
- - <2 ns Y/C delay inequity
- SD Composite/YC (S-Video)
- - 12-bit A/D, 4x oversampling
Video Output Digital (all simultaneously active)
- Dual SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits
- - Single Link 4:2:2 (1 x BNC each)
Video Output Analog (all simultaneously active)
- HD component YPbPr/RGB, SMPTE-274 (3 x BNC)
- - 12-bit D/A, 2x oversampling
- SD Component (3 x BNC)
- - SMPTE/EBU N10, Betacam 525 line, Betacam 525J
- - 12-bit D/A, 4x oversampling
- - +/- .25 dB to 5.5 MHz Y Frequency Response
- - +/- .25 dB to 2.5 MHz C Frequency Response
- - .5% 2T pulse response
- - <2 ns Y/C delay inequity
- SD Composite/YC (S-Video)
- - 12-bit D/A, 4x oversampling
Audio Input Digital
- 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
- 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (4 x BNC)
Audio Input Analog
- 8-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
- - +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
- - +/- 0.2db 20 to 20kHz Frequency Response
Audio Output Digital
- 16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
- 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (4 x BNC)
Audio Output Analog
- 8-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (8 x XLR via 25-pin breakout cable)
- - +12dBu, +15dBU, +18dBu, +24dBu (Full Scale Digital)
- - +/- 0.2db 20 to 20kHz Frequency Response
Up-Conversion
- Hardware 10-bit
- Anamorphic: full-screen
- Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars
- Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
- Zoom Letterbox: results in image zoomed to fill full screen
- Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
Down-Conversion
- Hardware 10-bit
- Anamorphic: full-screen
- Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
- Crop: image is cropped to fit new screen size
Cross-Conversion
- Hardware 10-bit
- 1080i to 720P
- 720P to 1080i
- 720P to 1080PsF
SD to SD Aspect Ratio Conversion
- Letterbox: This transforms SD anamorphic material to a letterboxed image.
- H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
- SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
- V Crop: Will transform SD letterbox material to an anamorphic image.
Timecode
Reference Input
- Analog Color Black (1V) or Composite Sync (2 or 4V)
- Looping, non-terminating
Network Interface
- 10/100 Ethernet (RJ-45)
- Embedded web server for remote control
- VTECS™ protocol for Remote Control Panel
User Interface
- Alphanumeric display, with dedicated buttons
Control
- GPI in/out, 9-pin D-connector
